Quadrox QGuard User Manual Bedienungsanleitung PDF herunterladen (Seite 35)

QGuard User Manual 35

Version 4.9 Series

 Multicast – this connection type is efficient when multiple applications use the

cameras. This approach decreases the bandwidth usage. MPEG cameras allow sending

the images to multicast IP addresses. These addresses are reserved in the IP protocol

for multicast information distribution. To program a camera to send the images to a

multicast address, you have to configure it in the camera’s native software software.

Specify the IP address on the Connection Screen of the camera wizard.

Multicast IP addresses are in the range 224.0.0.0 through 239.255.255.255.

Click Next to enter the next Camera Wizard screen.

3.3.1.2.3 Live View

The Live View tab will appear differently depending on whether you are viewing Analogue or

IP cameras.

The following parameters can be set for an analogue camera:

 Image resolution – as a rule of thumb, the higher the quality of the image (higher

image resolution), the lower the frame rate you will have.

 Differential transmission – when differential transmission is enabled, only the

differences between subsequent images are sent over the network. This feature

drastically decreases the amount of transmitted video-data and is especially designed

to be used when viewing camera images over the Internet.

Live View (Analogue camera) Screen

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 170 171

Keine Kommentare

Quadrox QGuard User Manual Bedienungsanleitung Seite 35